Vertex VXA 710 Transceiver - Pilot Supplies

Low Battery Indication As you battery discharges during use, the voltage willgradually become lower. When the “ ” beginsblinking on the LCD display,the battery packmust be recharged beforefurther use. Avoid recharging Li-Ion batteries before the “Low Battery”indicator is observed, as this can degrade thecharge capacity of your Li-Ion battery pack. VertexStandard recommends that you carry an extra, fullychargedpack with you so you will not lose communicationscapability due to a depleted Li-Ion battery.This “deep cycling” practice will help to maintainlonger overall battery life after many recharging cycles.BEFORE YOU BEGINAC Operation Using NC-72B/C(Receiving only)The VXA-710 may be operated from your house currentby use of the supplied NC-72B/C Battery Charger. TheNC-72B/C should only be used for reception, because itis not capable of supplying sufficient current to supporttransmission.To use the NC-72B/C, turn the transceiver off, then plugthe miniature connector of the Battery Charger into theEXT DC jack on the side of the radio. Now plug the BatteryCharger into the wall outlet. You may now turn on thetransceiver.VXA-710 SPIRIT OPERATING MANUAL11