TO 00-20-14 30 SEPTEMBER 2011 - Wright-Patterson Air Force Base

30 September 2011 TO 00-20-145.3.2 AFTO FORM 66 Polyester Stock. The TMDE polyester label, AFTO Form 66 (see Figure 5-3), may be usedwherever practical. It shall be used when using the aluminum AFTO Form 65 could be a safety hazard or prevent properTMDE function or calibration.AFTO FORM 66, OCT 89 TMDEExamples include:a. Small RADIAC dosimeters.b. Small torque indicating devices.B 0 0 4 6 3 9Figure 5-3. AFTO FORM 66, TMDE Bar Code Label, Polyester Stock.c. TMDE that is inserted into mainframes or incorporated into other types of equipment where the label couldbecome a conductive foreign object damage (FOD) hazard if it came loose.d. TMDE used on a flightline or anywhere a dislodged label could be ingested into an aircraft engine.5.4 CERTIFICATION LABELS.5.4.1 General. All equipment that requires calibration shall have a certification label attached by the calibrating workcenter prior to use by the Owning Work Center (OWC). The full-sized certification label (AFTO Form 108, 99) shouldbe used whenever possible and practical. Electronic (computer-generated) versions of certification labels that are printedon blank label stock are authorized for use provided the electronic (computer-generated) form maintains the same generalinformation and dimensions of the pre-printed form. Only one certification label shall be used for each item; allunapproved or expired labels shall be removed.5.4.1.1 Exceptions.5.4.1.1.1 Approved Non-Air Force Source Calibrated the TMDE. In this instance, the TMDE shall have both the non-AF certification label and an Air Force certification label with the additional required information affixed. The authorityin this situation is “TO 00-20-14”. Also, enter an annotation in the Air Force certification label special block, referencingthe non-AF certification label or certificate, and any additional certification data associated with that calibration.5.4.1.1.2 Non Existent NEC End Items. Certification labels are not required for SICL end-item part numbersdesignated NEC that do not physically exist (e.g., the AN/APM427) or merely designate a case, container, console orsimilar housing.5.4.1.2 Use of Condition Tags. When a certification label is affixed to TMDE, Air Force supply system condition tags,such as DD Forms 1574, Serviceable Label - Material, are not required unless the item is being returned to supply.5.4.1.3 Unauthorized Changes. Unless authorized, any changes to certification labels shall void the certification.Owning organizations may change the OWC in the IDENTIFICATION NO. block IAW paragraph 5.4.2.1.1 or 5.4.2.1.2,and CBU may be added to the DATE DUE block IAW paragraph 3.2.2b.5.4.2 Common Entry Instructions. The following requirements apply to all certification labels, unless otherwiseindicated. For additional requirements see specific entries under the individual labels.5-3