animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC

Group control inputOptions:• Disabled• EnabledOver this parameter it is determined whether the input is blocked to the group control or is freed. Over this input all four motors are selectedat the same time. Regardless of the parameter settings, the security settings (objects 32-41) have higher priority. If one of the security objectsis active, the input to the group control is blocked. With a bus power failure this input is freed. Even if it is blocked over the parameter settings it can be used as an emergency service. Withbus voltage return this input is blocked according to parameter settings or is freed.6.3 Menue index card "Motor 1...4, with Encoder"Four single menu index cards (motor 1 … 4) become visible if in the menu of the basic setting "General" the parameter setting "Individual" isselected. One menu index card (motor 1 - 4) becomes visible if in the menu of the basic setting "General" the parameter setting "Combined"is selected.mThe basic setting of the motors are different, depending on the selection of the motor type on the card "General" (DC without encoderor DC with encoder).The following parameter descriptions are related to the selection of the motor type "DC with encoder":Type of end productuser ergonomicsOptions:• Venetian blind with EU ergonomics• Venetian blind with US ergonomics• Roller blind• l Venetian blind with EU ergonomicsWith this parameter it is determined that the Venetian blind in EU ergonomics is selected over the local push button inputs or via theSomfy RTS radio transmitter.When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the correspondingparameters (short/long pressing of the push button). The operating ergonomics using a Somfy RTS radio transmitter remains unchanged.n For an explanation of EU/US and screen ergonomics see chapter 1 Definitions.animeo KNX 4 DC/E Moco • Ref. 5055608B - 23/54