animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC

Basic functionOptions:• Venetian blind UP / DOWN• Switch/Dry contact• 8-Bit value (rising edge)• DimmingContact AValue on rising edge (0-255)Options: • 0• 0 - 255With this parameter the value is set which is transmitted with a rising edge to the local input A.Contact type input AOptions:• Normally open• Normally closedWith this parameter it is defined which contact type is at the local input A. Normally open: The contact at the local input is activated closedand not activated opened. Normally closed: The contact at the local input is activated opened and not activated closed.Contact BValue on rising edge (0-255)Options: • 0• 0 - 255With this parameter the value is set which is transmitted with a rising edge at the local input B.Contact type input BOptions:• Normally opened• Normally closedWith this parameter it is defined which contact type is at the local input B. Normally open: The contact at the local input is activated closedand not activated opened. Normally closed: The contact at the local input is activated opened and not activated closed.animeo KNX 4 DC/E Moco • Ref. 5055608B - 34/54