animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC
animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC
animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Long operation (move) afterOptions:• 0.5 seconds• 0.3 - 5.0 secondsThis parameter defines the activity time of the corresponding push button which distinguishes between the sending of a short-termtelegram (Step/Stop) and a long-term telegram (UP / DOWN). If the time, for example, is set on 0.5 seconds, a long-term telegram is generatedonly with a longer pressing of the push button which is longer than 0.5 seconds. With a shorter activation which is smaller than 0.5seconds, a short-term telegram is generated.Contact type input AOptions:• Normally closed• Normally openOver this parameter it is defined which type of contact is at the local input A. Normally closed: The contact at the local input is activatedclosed and not activated opened. Normally opened: The contact at the local input is activated opened and not activated closed.Contact type input BOptions:• Normally closed• Normally openOver this parameter it is defined which type of contact is at the local input B. Normally closed: The contact at the local input is activatedclosed and not activated opened. Normally opened: The contact at the local input is activated opened and not activated closed.Basic functionOptions:• Venetian blind UP / DOWN• Switch/Dry contact• 8-Bit value (rising edge)• Dimminganimeo <strong>KNX</strong> 4 DC/E Moco • Ref. 5055608B - 31/54