animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC

Automatic cascadingOptions:• No• YesIf this parameter is set on "Yes", the motor outputs with one second delay in each case move to the corresponding position. This delay timeis taken into account with the start-up of the positions, which are generated from the settings "Reaction with bus voltage return" and "Reactionwith mains voltage return (230 V)". Advantage: Power spikes can thus be reduced in larger projects.6.9 Menue index card "Feedback motor positions"On this menu index card the parameters can be selected to announce the position status of the individual blinds on the bus. In addition, thegenerated status positions are based on the parametered running and tilting times of the menu index cards motor 1 ... 4 or motor 1 - 4.Feedback of statusUpper/lower end positionsOptions:• No• YesThis parameter opens the parameter"Type of messaging".Type of feedbackUpper/lower end positionsOptions:• Combined if all are up/down• Individual• Combined if all are up/downIf this parameter is selected, the corresponding upper or lower end position is only announced on the bus, when all four blinds have reachedthe upper (object 59) or lower (object 64) end position.• IndividualIf this parameter is selected, the corresponding upper or lower end position is announced on the bus for each blind individually. Here, theobjects in each case (55-58 and 60-63) are made availaible.animeo KNX 4 DC/E Moco • Ref. 5055608B - 39/54