animeo® KNX 4 DCE Motor Controller WM/DRM 220-240 V AC

The following parameter descriptions are related to the selection of the motor type "DC without encoder":Type of end productuser ergonomicsOptions:• Venetian blind with EU ergonomics• Venetian blind with US ergonomics• Roller blind• l Venetian blind with EU ergonomicsWith this parameter it is determined that the Venetian blind in EU ergonomics is selected over the local push button inputs or via theSomfy RTS radio transmitter.When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the correspondingparameters (short/long pressing of the push button). The operating ergonomics using a Somfy RTS radio transmitter remains unchanged.n For an explanation of EU/US and screen ergonomics see chapter 1 Definitions.• l Venetian blind with US ergonomicsWith this parameter it is determined that the Venetian blind in US ergonomics is selected over the local push button inputs or via theSomfy RTS radio transmitter.When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the correspondingparameters (short/long pressing of the push button). The operating ergonomics using a Somfy RTS radio transmitter remains unchanged.n For an explanation of EU/US and screen ergonomics see chapter 1 Definitions.• l Roller blindWith this parameter it is determined that the corresponding blind is selected over move/stop commands when the controlling is doneover the local push button inputs or via the Somfy RTS radio hand transmitter.When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the correspondingparameters (short/long pressing of the push button). The operating ergonomics using a Somfy RTS radio transmitter remains unchanged.n For an explanation of EU/US and screen ergonomics see chapter 1 Definitions.Running time UP (1-320s)Options: • 120• 1 - 320 secondsThe time parametered here is the maximum running time from the lower end position to the upper end position. An excess time of 5 secondsis always added, except with position telegrams (objects 9-12). If a position telegram with the value "0" is sent to the corresponding object,an excess time of 5 seconds is still added to it.Running time DOWN (1-320s)Options: • 120• 1 - 320 secondsThe time parametered here is the maximum running time from the upper end position to the lower end position. An excess time of 5 secondsis always added, except with position telegrams (objects 9-12). If a position telegram with the value "255" is received on the correspondingobject, an excess time of 5 seconds is still added to it.Complete tilting timeBase 0.1s (0-100)Options: • 30• 0 - 100The time parametered here is the maximum tilting time of the slat. This parameter is only visible when the type of end product, Venetianblind with EU ergonomics or Venetian blind with US ergonomics, have been selected.animeo KNX 4 DC/E Moco • Ref. 5055608B - 26/54