Control Systems - Uniclima

1 Individual control system3. Wired remote controller2) MWR-WE00(4) Additional functionsService mode menu descriptionMenu Detailed description DisplayOption codeDetailed indoor unit functions such as indoor unit model type, indoorunit capacity, blackout restoration, and drain pump control are set bythe combination of 12-digit or 24-digit numbers.(ex. 005700-123004)Menu No Option codeMenu NoIndoor unit addressAddress used for indoor unit communication and control(Set by a rotary switch of the indoor unit PCB)1) Main address: Indoor unit’s physical address2) RMC address: Address used in the central controlRMC (1) : Interface module channel addressRMC (2) : Indoor unit group addressMain addressLeft: RMC (1) addressRight: RMC (2) addressIndoor unit cycle dataMenuData1 Indoor temperature2 EVA-IN temperature3 EVA-OUT temperature4 EEV stepCompensate temperature sensor for wired remote controllerTo compensate and display the measured temperature on thetemperature sensor in the wired remote controller.(ex : Actually measured temperature 20°C(68°F),and compensate 5°C(9°F) It is displayed as 25°C(77°F) whenindoor temperature is displayed.) Compensation value range : -9~9°C (-16.2~16.2°F) Temperature unit : CelsiusMenu NoData NoMenu NoDataCurrent room temperatureex)24.1°C(24 1)Temperature compensation value ex)2.3°CMenu NoCompensation of FAN RPM of the indoor unitDisplays current indoor unit Fan RPMcompensation setting state.(Check indoor unit PCB switch K3 setting status)0 : Use compensation1 : No use compensationRPM compensationstate30