Control Systems - Uniclima

3 Integrated management system1. DMS (Data Management Server)(4) Dimensional drawing219 (8-5/8)135(5-3/8)28 (1-1/8)30 (1-1/8)60 (2-1/4)Unit : mm(inch)20 (3/4)135(5-3/8)150 (5-7/8) 130(5-1/8)10(3/8)37 (1-1/2) 60 (2-1/4)(5) Buttons and connectors12345768 9 1011 1272No. Name Description123456789101112Option switchPower terminalIP reset buttonReset buttonExternal input port DI-2External input port DI-1External output port DO-2External output port DO-1LAN connectorRS485 communication portDebugging connector1Debugging connector2Option switch for specification on external input to DMSPower supply to DMS. 100V~240V, 50/60HzPress IP reset button for 5 seconds to reset DMS IP to default 192.168.0.2.All LEDs are turned off during OS booting after IP reset (Linked LED is notaffected if LAN connection is made). This button is useful when installers forgotthe set DMS IP.Press the reset button to restart DMS.All indoor unit operation and wired/wireless remote control useare controlled according to the option switch setting.All indoor unit operation and wired/wireless remote control useare controlled according to the option switch setting.DC signal voltage is output in case of error in more than one indoor unit andoutdoor unit. Output voltage : 12VDC, 500mADC signal voltage is output in case more than one indoor unit start to operate.Output voltage : 12VDC, 500mALAN connection with upper-layer devices.RS485 connection with centralized controllers (polarized).ReservedUsed for system debugging of DMS operation, configuration and data management.