Control Systems - Uniclima

(2) Under room mode tracking (K3 to ON)After completion of indoor unit tracking, all LEDs stay in the OFF state. When there occurs block in communication of interface module, only All ON LED blinks.Indoor unit operation All ON LED lightingError in I/M, indoor units All ON LED blinkingRed LED – It flickers during communication with upper-layer devices(DMS, S-NET mini)Green LED – It flickers while interacting with interface modules.Centralized control system11) Compatibility with interface module• MIM-B13B : DVM PLUS II, DVM PLUS III, mini DVM(R410A), FJM, ERV12) Operation mode selection switchIt is mainly used to set indoor unit operation mode to Cooling, Heating or Auto.61