Control Systems - Uniclima

1 Individual control system3. Wired remote controller4) Installation (MWR-WS00/WE00/SH00)Error codeDisplay a type of error occurred in indoor units, outdoor units and, wired remote controller.(The following is errors related to a wired remote controller)Error code Description Remark601 Wired remote controller Indoor unit communication errorWhen communication with indoor units isblocked for 3 minutes.602Wired remote controller communication error betweenMaster SlaveWhen two wired remote controllers areused for one indoor unit, communicationbetween has been blocked.603 Communication packet error -604 Wired remote controller Indoor unit tracking failure error Occurs when an indoor unit is not installed.605 Wired remote controller 7-day scheduler communicationerror606 COM1, COM2 cross installation error607 2 Master wired remote controllers618 Excessive number of indoor units installation error619 Multiple Celsius / Fahrenheit indoor unit error620 Celsius / Fahrenheit setting errorWhen communication with 7-day scheduleris blocked for 3 minutes.When the wired remote controller isinstalled onto indoor unit COM1 (F1/F2).When two Master wired remote controllersare installed in one COM2 communicationline.When more than 16 indoor units areconnected to wired remote controller.When indoor units set in Celsius orFahrenheit are together connected to thewired remote controller.When indoor unit is set in Celsius, its wiredremote controller is set to Fahrenheit, orvise versa.621Option switch setting error of the Master/Slavewired remote controller-626 Connect ERV to MWR-WE00 without indoor unit -653Wired remote controller (MWR-WS00)temperaturesensor error (Short/Open)-654 EEPROM error -40