Users Manual - Microplex Systems Ltd.

NOVELL CONFIGURATIONNetWare Version 3.x PSERVER SetupTo configure a print queue on a NetWare 3.x network, youwill need to:1 Log on to the Novell file server as Supervisor.2 Enter PCONSOLE.3 Select “Print Queue Information” from the PCON-SOLE Main Menu.4 Press INSERT to add a new queue to the list of currently-definedqueues showing.5 Type in the name of this new queue when promptedand press ENTER. This can be any name you’d like.6 Press ESCAPE to return to the PCONSOLE MainMenu.7 Select “Print Server Information” and press ENTER.8 Press INSERT when the list of existing print serversdisplays to add a server.9 Type the name of the M205/M206 when prompted fora print server name and press ENTER when done. Bydefault, the M205/M206 is named “M_xxxxxx” where“xxxxxx” equals the last six digits of the print server’sEthernet address found on the bottom of the device(e.g. M_071C1A).10 Back at the print server list, select this newly-definedM205/M206 and press ENTER.11 Select “Print Server Configuration” from the menu thatdisplays.12 Select “Printer Configuration” from the next menu todisplay a list of configured printers.13 Select the first item listed as “NOT INSTALLED” andpress ENTER.39