Users Manual - Microplex Systems Ltd.

M205/M206 REFERENCE PAGESCommon npsh CommandsThe npsh command shell consists of more than 50 commands.Table 3 outlines some of the more common commands.For a complete command reference, please refer toAppendix G - More on Commands (command.pdf).Note:When you encounter the word “ifnum”, substitutein “1” to represent the network interface (i.e.Ethernet) supported by the M205/M206.Table 3: Common CommandsCommand Syntaxstore tcpip ifnumaddr IPaddressstore tcpip ifnummask netmaskstore tcpip routeadd default routerI-Paddress ifnumstore tcpip ifnumopts [[-]rarp] [[-]bootp] [[-]dhcp]store pserver namenewnameDescriptionStore the IP address forthe M205/M206.Store the subnet mask forthe M205/M206.Store a default router/gatewayfor the M205/M206to forward remote packetsto.Control RARP, BOOTP,and DHCP requests for IPaddresses.Configure the M205/M206’s name used withinWindows, Novell, andAppleTalk setups.52