user manual - Utax

Sending FunctionsOriginal SizeSelect the size of originals that will serve as the basis for scanning. Be sure to select the original size before startingthe sending process.Choose the original size from the following groups of original size.ItemOriginalSizesSizeLetter, Legal, Statement, Executive, Officio II, A4, A5, A6,B5, B6, Folio, 16K, ISO B5, Envelope #10, Envelope #9,Envelope #6, Envelope Monarch, Envelope DL, EnvelopeC5, Hagaki, Oufuku Hagaki, Youkei 4, Youkei 2 andCustom** Regarding the setting method of Custom Original Size, refer toCustom Original Size Setup on page 8-7.Use the procedure below to select the original size when sending scanned images.1 Press the Send key.2 Place the original.Function Menu: a b*********************1 Color Selection T2 Original Size T3 Original Image T[ Exit ]3 Press the Function Menu key. Function Menu appears.4 Press the or key to select [Original Size].Original Size: a b*********************1 *Letterq2 Legalq3 Statementq5 Press the OK key. Original Size appears.6 Press the or key to select the desired original sizeand then press the OK key.Completed. is displayed and the screen returns to thebasic screen for sending.7 Specify the destination, and press the Start key to startsending.NOTE: Press the Reset key to reset the settings selected inFunction Menu.5-2