user manual - Utax

Sending FunctionsDuplex SendingSelect the type and binding of original depending on the original.The table below lists the binding directions for each original type.Original Type Binding Binding1-sided Sheet Original 1-sided — —2-sided Sheet Original 2-sided Binding Left/Right,Binding TopTop Edge Top,Top Edge LeftUse the procedure below to select the original type and binding direction when sending scanned originals.51 Press the Send key.2 Place the originals on the document processor.Function Menu: a b*********************1 Color Selection T2 Original Size T3 Original Image T[ Exit ]3 Press the Function Menu key. Function Menu appears.4 Press the or key to select [Duplex].Duplex:a b*********************1 *1-sided2 2-sided5 Press the OK key. Duplex appears.6 Press the or key to select [1-sided] or [2-sided].If you select [2-sided], press [Detail] (the Right Selectkey), select the binding edge and press the OK key, andthen select the original setting orientation on the nextscreen.7 Press the OK key.Completed. is displayed and the screen returns to thebasic screen for sending.8 pecify the destination, and press the Start key to startsending.NOTE: Press the Reset key to reset the settings selected inFunction Menu.5-7