user manual - Utax

Preparation before UseSending E-mailSpecifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments.To use this function, this machine must be connected to a mail server using the SMTP protocol.2Before sending images loaded onto this machine as E-mail attachments, check the following:• The network environment used to connect this machine to the mail serverA full-time connection via a LAN is recommended.• SMTP SettingsUse Embedded Web Server to register the IP address or host name of the SMTP server.• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.• Sender addressThe procedure for specifying the SMTP settings is explained below.1 Click Advanced -> SMTP -> General.2-29