user manual - Utax

Document Box8 Press the or key to select the file to be printed, andthen press [Select] (the Right Select key). The selectedfile will be marked.If you need to add another file, repeat this procedure toselect the file.Menu:a b*********************1 Select All2 Clear All3 DetailNOTE: To select all files, press Menu (the Left Select key)and select [Select All]. To deselect all files, select [Clear All].To show file details, select [Detail].Fiala:a b*********************1 Print2 Delete9 Press the OK key. The file print and delete selectionmenu appears.10 Press the or key to select [Print] and press the OKkey.NOTE: To delete the selected file without printing it, select[Delete] and press the OK key. The file deletion confirmationscreen appears. Press [Yes] (the Left Select key).Completed. appears and the file is deleted.ID: b11 The ID entry screen appears. Enter the ID and press theOK key.*********************1216SCopies:M b(1 - 999,---)**********copies---12 The number of copies screen appears. Set the numberof copies and press the OK key.13 The file print confirmation screen appears. Press [Yes](the Left Select key). Accepted appears and printingbegins.Quick Copy modeThis mode is used to print an additional copy of a document that has already been printed. If a document is printedwith Proof and hold selected in the printing system driver, the document will be simultaneously stored on the RAM disk.The required number of copies can be printed whenever needed from the operation panel. If more documents than the6-10