user manual - Utax

Default Setting (System Menu)When KPDL Is Selected for EmulationWhen you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting is Off.Use the procedure below to make the setting.Emulation Set.: a b5 PCL6*********************6 KPDL7 KPDL(Auto)1 In Emulation Set, press the or key to select [KPDL].KPDL Error Rpt: a b1 Off*********************2 *On2 Press the OK key. KPDL Error Rpt appears.3 Press the or key to select [Off] or [On].4 Press the OK key. Completed. is displayed and thescreen returns to the Printer menu.When KPDL(Auto) Is Selected for EmulationIf you use the KPDL(Auto) emulation mode, KPDL and another emulation mode can be automatically switchedaccording to the data (alternative emulation).For alternative emulation, you can select one of the following printers. The default setting is PCL6.• Line Printer• IBM Proprinter• DIABLO 630• EPSON LQ-850• PCL6Also, as when you select [KPDL], set whether or not to output KPDL error reports. The default setting is Off.Use the procedure below to make the setting.Emulation Set.: a b5 PCL66 KPDL*********************7 KPDL(Auto)1 In Emulation Set, press the or key to select[KPDL(Auto)].8-76