user manual - Utax

Preparation before UseSwitching the Language for Display [Language]Select the language displayed on the Message Display.Use the procedure below to select the language.21 Turn on the main power switch.2 Press the System Menu/Counter key on the main unitoperation panel.Login User Name: L b********************Login Password:[ Login ]When you are performing user management and havenot logged in, a login screen will appear. Then, enter theuser ID and password to log in.NOTE: The following administrator is registered in themachine at the factory.Login User Name:4000Login Password:4000Refer to Character Entry Method on Appendix-5 for detailson entering characters.Sys. Menu/Count.: a b3 System4 User/Job Account*********************5 Common Settings3 In the Sys. Menu/Count. menu, press the or key toselect [Common Settings].Common Settings: a b*********************1 Language2 Default Screen3 Sound[ Exit ]4 Press the OK key. The Common Settings menu appears.5 Press the or key to select [Language].2-9