user manual - Utax

Default Setting (System Menu)Interface Block SettingThis allows you to protect this machine by blocking the interface with external devices such as USB hosts or optionalinterfaces.The following interface block settings are available:• USB Host (USB memory slot setting)• USB Device (USB interface setting)• Optional interface (Optional interface card setting)USB Host (USB memory slot setting)This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.Use the procedure below to specify the USB Host setting.Sys. Menu/Count.:a b1 Report2 Counter*********************3 System[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [System], and press the OK key.Login User Name: L b*******************Login Password:A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).[ Login ]System:a b1 Network Setting*********************2 I/F Block Set.3 Security Level[ Exit ]2 The System menu appears.3 Press the or key to select [I/F Block Set.].I/F Block Set.: a b*********************1 USB Host2 USB Device3 Option I/F[ Exit ]4 Press the OK key. The I/F Block Set. menu appears.5 Press the or key to select [USB Host].8-146