user manual - Utax

Default Setting (System Menu)Network Setting: a b*********************7 Secure Protocol8 Host Name9 LAN Interface[ Exit ]4 Press the OK key. The Network Setting menu appears.5 Press the or key to select [Secure Protocol].Secure Protocol: a b*********************1 SSL2 IPP Security3 HTTP Security[ Exit ]6 Press the OK key. Secure Protocol appears.SSL:a b*********************1 *Off2 On7 Press the or key to select [SSL].8 Press the OK key. SSL appears.89 Press the or key to select [On] or [Off].10 Press the OK key. Completed. is displayed and thescreen returns to the Secure Protocol menu.IPP SecuritySpecify the protocol to be used for IPP. The default setting is IPP/IPP over SSL.Use the procedure below to make the setting.Sys. Menu/Count.:a b1 Report2 Counter*********************3 System[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [System], and press the OK key.Login User Name: L b*******************Login Password:A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).[ Login ]8-141