user manual - Utax

Default Setting (System Menu)IPv6 Setting: a b*********************1 *Off2 On8 Press the OK key. IPv6 Setting appears.[ Exit ]9 Press the or key to select [On] or [Off].10 Press the OK key. Completed. is displayed and thescreen returns to the TCP/IP Settings menu.NetWare SetupSelect the NetWare network connection. After that, select frame types for NetWare network from Auto,Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "Off".Use the procedure below to setup the NetWare setting.Sys. Menu/Count.:a b1 Report2 Counter*********************3 System[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [System], and press the OK key.8Login User Name: L b*******************Login Password:[ Login ]A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).System:a b*********************1 Network Setting2 I/F Block Set.3 Security Level[ Exit ]2 The System menu appears.Network Setting: a b*********************1 TCP/IP Settings2 NetWare3 AppleTalk[ Exit ]3 Press the or key to select [Network Setting].4 Press the OK key. The Network Setting menu appears.5 Press the or key to select [NetWare].8-131