user manual - Utax

Default Setting (System Menu)Date/TimerDate/Timer settings include:• Date/Time …8-27• Date Format …8-29• Time Zone …8-30• Summer Time …8-31• Auto Error Clear …8-32• Auto Sleep …8-34• Auto Panel Reset …8-37• Low Power Timer …8-39• Unusable Time …8-40NOTE: If user login administration is enabled, you can only change the settings by logging in with administratorprivileges.Date/TimeSet the date and time for the location where you use the machine. If you perform Send as E-mail, the date and timeset here will be displayed on the header.8CAUTION: Be sure to set Time Zone before the Date/Time setup.Use the procedure below to set the date and time.Sys. Menu/Count.: a b3 System4 User/Job Account*********************5 Common Settings[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [Common Settings].Common Settings: a b*********************1 Language2 Default Screen3 Sound[ Exit ]2 Press the OK key. The Common Settings menu appears.3 Press the or key to select [Date Setting], and pressthe OK key.Login User Name: L b*******************Login Password:A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).[ Login ]8-27