user manual - Utax

Preparation before UseAuto Low Power ModeAuto Low Power Mode automatically switches the machine into Low Power Mode if left idle for 2 minutes.Sleep and Auto SleepSleepTo enter Sleep, press the Power key. Message Display andall indicators on the operation panel will go out to save amaximum amount of power except the Main Power indicator.This status is referred to as Sleep.If print data is received during Sleep, the print job isperformed while the Message Display remains unlit.If you are using the products equipped with the fax function,received fax data is printed out while the operation panelalso remains unlit.To resume, press the Power key. The machine will be readyto operate in about 15 seconds.Note that ambient environmental conditions, such asventilation, may cause the machine to respond more slowly.Auto SleepAuto Sleep automatically switches the machine into Sleep Mode if left idle for 15 minutes.2-8