user manual - Utax

Default Setting (System Menu)Border LineSelect the default value for border line when [2 in 1] is selected for Combine. Items available for the default value areas follows:ItemDescriptionNonel Solid Linem Dotted Linen Positioning MarkNo border line.Draws solid border lines.Draws dotted border lines.Puts a mark on the border line position.Use the procedure below to select the default value for border line.Sys. Menu/Count.: a b3 System4 User/Job Account*********************5 Common Settings[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [Common Settings].Common Settings: a b*********************1 Language2 Default Screen3 Sound[ Exit ]2 Press the OK key. The Common Settings menu appears.3 Press the or key to select [Function Default].Function Default: a b*********************1 Color Selection2 Scan Resolution3 FAX Resolution[ Exit ]4 Press the OK key. The Function Default menu appears.5 Press the or key to select [Detail Setting].Detail Setting: a b*********************1 2 in 1 layout2 4 in 1 Layout3 Border Line[ Exit ]6 Press the OK key. The Detail Setting menu appears.7 Press the or key to select [Border Line].8-60