user manual - Utax

Sending FunctionsOriginal ImageSelect image quality suitable to the type of original.The table below shows the quality options.ItemText+PhotoPhotoTextFor OCRDetailText and photos together.For photos taken with a camera.Only text, no photos.For documents to be read by OCR*.* This function is only available for black and white mode.Use the procedure below to select the quality when sending scanned originals.1 Press the Send key.2 Place the originals.Function Menu: a b*********************1 Color Selection T2 Original Size T3 Original Image T[ Exit ]3 Press the Function Menu key. Function Menu appears.4 Press the or key to select [Original Image].Original Image: a b*********************1 *Text+Photo2 Photo3 Text5 Press the OK key. Original Image appears.6 Press the or key to select the desired image quality.7 Press the OK key.Completed. is displayed and the screen returns to thebasic screen for sending.8 Specify the destination, and press the Start key to startsending.NOTE: Press the Reset key to reset the settings selected inFunction Menu.5-12