user manual - Utax

Default Setting (System Menu)NetWare:a b*********************1 *Off2 On6 Press the OK key. NetWare appears.7 Press the or key to select [On] or [Off].Frame Type: a b*********************1 *Auto2 802.33 Ether-IIIf you select [On] and press the OK key, Frame Typeappears. Press the or key to select the desiredframe type.The available frame types are as follows:Auto802.3Ether-II802.2SNAP8 Press the OK key. Completed. is displayed and thescreen returns to the Network Setting menu.For detailed information on restarting the system, refer toRestarting the System on page 8-119.AppleTalk SetupSelect the Apple Talk network connection. The default setting is On.Use the procedure below to setup the AppleTalk setting.Sys. Menu/Count.:a b1 Report2 Counter*********************3 System[ Exit ]1 In the Sys. Menu/Count. menu, press the or key toselect [System], and press the OK key.Login User Name: L b*******************Login Password:A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).[ Login ]System:a b*********************1 Network Setting2 I/F Block Set.3 Security Level[ Exit ]2 The System menu appears.8-132