MiCOM P921/P922/P923 - Schneider - error

P92x/EN FT/H42Page 2/70Technical GuideUser GuideMiCOM P921/P922/P9232.5 Communication 342.5.1 Rear communication port description 342.5.2 Rear and front communication management 342.5.3 HMI description 352.6 Protections 372.6.1 Undervoltage protection 372.6.2 Overvoltage protection 392.6.3 Zero sequence overvoltage (neutral displacement) protection 402.6.4 Negative sequence overvoltage protection (MiCOM P922 and P923) 422.6.5 Positive sequence undervoltage protection (MiCOM P922 and P923) 432.6.6 Frequency protection (MiCOM P922 and P923) 442.6.7 Rate of change of frequency (MiCOM P923 only) 452.6.8 “DELTA U / DELTA T” submenu (MiCOM P923 only) 482.7 Automatic Control functions 502.7.1 "TRIP OUTPUT RLY" Submenu 502.7.2 "LATCH FUNCTIONS" Submenu 512.7.3 "BLOCKING LOG1 t" Submenu 532.7.4 "BLOCKING LOG2 t" Submenu 542.7.5 "AUX OUTPUT RLY" Submenu 542.7.6 "LATCH OUTPUT RELAYS" Submenu 562.7.7 "F + df/dt" (Frequency change of rate of frequency) submenu (MiCOM P923 only) 572.7.8 "LOGIC EQUATIONS" Submenu 582.7.9 "INPUTS" Submenu 602.7.10 "VT SUPERVISION" Submenu (MiCOM P922 and P923 only) 622.7.11 "CB SUPERVISION" Submenu 632.8 RECORDS functions (MiCOM P922 and P923 ONLY) 642.8.1 "CB MONITORING" Submenu 642.8.2 "FAULT RECORD" Submenu 652.8.3 "DISTURB RECORDER" Submenu 662.8.4 "TIME PEAK VALUE" Submenu 672.8.5 "FREQ DISTURB REC" Submenu (only MiCOM P923) 67