MiCOM P921/P922/P923 - Schneider - error

P92x/EN TD/H42Page 20/42Technical GuideTechnical DataMiCOM P921/P922/P923Setting Range Step SizeTMS 0,5 - 100 0.5Setting Range Step SizetRESET (only DT) 0 – 100s 0.01s5.4.4 Definite time delay characteristics5.4.5 HysteresisSetting Range Step SizetV 2 > 0 – 599s 0.01stV 2 >> 0 – 599s 0.01sHysteresis fixed 95%When the V 2 > is associated with IDMT curve, the recommended maximum settingvalue should be less or equal to max. withstand voltage of the VT inputs divided by20.5.5 Positive sequence undervoltage (ANSI code 27D) only P922 & P9235.5.1 Threshold settings (secondary values)−Nominal voltage range: 57 – 130VSetting Range Step SizeV 1 < Voltage set 5 – 130V 0.1VV 1