MiCOM P921/P922/P923 - Schneider - error

Firmware and Service ManualP92x/EN VH/H42xVersion HistoryMiCOM P921/P922/P923 Page 1/6P923XXXP922XP921SoftwareVersionMajor MinorHardwareSuffixOriginalDate of Issue01 A HARD 4 03/200001 B HARD 4 05/2000Relay type: P92x …Description of ChangesXS1Compatibility01 C HARD 4 07/2000Software changes implemented in this version- Original issueV2.05X01 D HARD 4 11/2000Software changes implemented in this version- Original issueXV2.0501 E HARD 4 02/2001Hardware changes implemented in this version- P922S new productSoftware changes implemented in this version- Evolution for EDF- Analogic auto control 0V addedXXXXXV2.05X04 D HARD 4 08/2001Software changes implemented in this version- New communication (Courier and IEC 103) protocols added- Spanish, German, Italian, polish and Russian languages added- Setting of hysteresis of maximum voltage protection modifiedXXV2.05 XXX04 E HARD 4 01/2002Software changes implemented in this version- Czech new language- Setting of hysteresis of minimum voltage protection evolutionXV2.05 XXSoftware changes implemented in this version- Original issue- Evolution according to P92x_V4_uk.doc document- Change of signification of Bit 0 of status of modbusV2.07XXSoftware changes implemented in this version- Development of new communication ( DNP3).- Change of management of alarm major at start forcommunication.XV2.07 XX