N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Using Pulse Modulation (Option UNU or UNW)Figure 6-1Pulse Softkeyspage 133page 133Determines the type of signaltransmitted out of the Trig Out BNC.Normal = high state.Invert = low state.These softkeys areonly available whenthe Pulse–Source isset to AdjustableDoublet.See also, page 15and page 19Low = settledLatency from the externalpulse input to the pulsesync output ≈ 50−60 ns.Width Period50 ns > 50 ns20 ns ≤50 nsDetermines how the signal generatorresponds to an external pulse signal.Normal = high state.Invert = low state.Thesesoftkeys areonly availablefor theN5182A.This is the 2nd page ofthe Menu.TTL signalSelect the signalrouted to eachoutput connector.Select which marker toroute to the Event 1 BNC.Select whichmarker toroute to theTrig out BNC.For details on each key, use key helpas described on page 42.Thesesoftkeys areonly availablefor theN5182A.130 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide