N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic OperationWorking with FilesFile SoftkeysFor details on each key, use key help as described on page 42.Note: Available file types depend on the installed options.Display internal or USBfiles, depending on theselected storage media.Instrument operating parameters (see page 70).Sweep data from the List Mode Values table editor.User flatness calibration corrections.page 65Deletions requireconfirmation.Displays IQ FilesDisplays FSKFilesDisplays FIRFilespage 310page 74Available only with USB connected(i.e. Without external USB connected,softkeys are greyed out).The signal generator does notformat USB media or change filepermissions. Use a computer toperform these operations.Shows the current directoryThe display indicates when the current directory is the default storage path.For information on setting the default storage path, see page 74.This key changes, depending onthe selected file. See page 68.page 69Available only when thecurrent directory is not thetop level directory.Requiresconfirmationpage 69When you connect USB media to the instrument, the signal generator displays the USB Media menu and the message External USB Storage attached. When youdisconnect the USB media, the message External USB Storage detached displays. When you open the External Media menu without USB media connected, thesignal generator displays the message External Media Not Detected.64 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide