N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Notices© Agilent Technologies, Inc. 2006-2009No part of this manual may be reproduced inany form or by any means (including electronicstorage and retrieval or translationinto a foreign language) without prior agreementand written consent from AgilentTechnologies, Inc. as governed by UnitedStates and international copyright laws.Manual Part NumberN5180-90003EditionSeptember 2009Printed in USAAgilent Technologies, Inc.3501 Stevens Creek Blvd.Santa Clara, CA 95052 USAWarrantyThe material contained in this documentis provided “as is,” and is subjectto being changed, without notice,in future editions. Further, to the maximumextent permitted by applicablelaw, Agilent disclaims all warranties,either express or implied, with regardto this manual and any informationcontained herein, including but notlimited to the implied warranties ofmerchantability and fitness for a particularpurpose. Agilent shall not beliable for errors or for incidental orconsequential damages in connectionwith the furnishing, use, or performanceof this document or of anyinformation contained herein. ShouldAgilent and the user have a separatewritten agreement with warrantyterms covering the material in thisdocument that conflict with theseterms, the warranty terms in the separateagreement shall control.Technology LicensesThe hardware and/or software described inthis document are furnished under a licenseand may be used or copied only in accordancewith the terms of such license.Restricted Rights LegendU.S. Government Restricted Rights. Softwareand technical data rights granted tothe federal government include only thoserights customarily provided to end user customers.Agilent provides this customarycommercial license in Software and technicaldata pursuant to FAR 12.211 (TechnicalData) and 12.212 (Computer Software) and,for the Department of Defense, DFARS252.227-7015 (Technical Data - CommercialItems) and DFARS 227.7202-3 (Rights inCommercial Computer Software or ComputerSoftware Documentation).Safety NoticesCAUTIONA CAUTION notice denotes a hazard.It calls attention to an operatingprocedure, practice, or the likethat, if not correctly performed oradhered to, could result in damageto the product or loss of importantdata. Do not proceed beyond aCAUTION notice until the indicatedconditions are fully understood andmet.WARNINGA WARNING notice denotes ahazard. It calls attention to anoperating procedure, practice, orthe like that, if not correctly performedor adhered to, could resultin personal injury or death. Do notproceed beyond a WARNINGnotice until the indicated conditionsare fully understood andmet.Users Guide