N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic OperationWorking with FilesLoading (Recalling) a Stored FileThere are several ways to load (recall) a stored file.• For an instrument state file, use the Recall hardkey shown in Figure 3- 11 on page 70.• For other types of data, use the Load/Store softkey (shown below) that is available through themenu used to create the file.File TypeListStateWaveformUser FlatnessUser PresetRecall FromSweep menuSave menuMode menuAmplitude menuUser Preset menuLoading a File From USB MediaTo load a file from USB media, use the USB file manager shown below.File > Catalog Type > > More > USB File ManagerorFile > More > USB File ManagerorInsert the USB mediaFile TypeListStateWaveformUser FlatnessUser PresetLicenseExtension.list.state.waveform.uflat.uprst.licPressing Select with file highlighted...loads list and starts sweepload instrument stateloads and plays waveformloads and applies user flatnessloads and executes user presetinstalls purchased licenseIf the signal generator does not recognize thefile, you must select how the file is to be used.This key changes, dependingon the selected file.Copy & Select User FlatnessCopy & Play WaveformCopy & Play SequenceEnter DirectoryRecall Instrument StateLoad ListInstall licensesNo action (USB disconnected)Use AsFor details on each key, use key help as described on page 42.68 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide