N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Signal Generator OverviewFront Panel Overview – N5161A/62A MXG ATEFront Panel Overview – N5161A/62A MXG ATE1. Host USB2. Power Switch and LEDs 3. LAN5. ERROR6. LAN Reset4. 1588N5161A/62A MXG ATE Front Panel FunctionsThe MXG ATE is identical to an MXG with a front panel display, except that the front panel,hardkeys and softkeys functionality are only available through SCPI commands or the Web–EnabledMXG. For information on the Web–Enabled MXG, refer to the Installation Guide, the ProgrammingGuide and the SCPI Command Reference.Functions unique to the MXG ATE:• LAN LED (page 10).• 1588 LED (page 10).• ERROR LED (page 10).• LAN Reset Hardkey (page 10).For more information, refer to the Service Guide.1. Host USBConnector Type AUSB Protocol 2.0Use this universal serial bus (USB) to connect a USB Flash Drive (UFD) for data transfer. You canconnect or disconnect a USB device without shutting down or restarting the signal generator. Theinstrument also has a rear panel device USB connector (see page 17) used to remotely control theinstrument.Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 9