N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic Digital Operation (Option 651/652/654)Saving a Waveform’s Settings & ParametersValues differ betweenthe two columnse. Save the current settings to the file header:Press the Save Setup To Header softkey.The settings from the Current Inst. Settings column now appear in the Saved HeaderSettings column. This saves the new current instrument settings to the file header.If you change any of the signal generator settings listed in the file header after you select thewaveform file, the changed setting(s) appear in the file header’s Current Inst. Settings columnand are used instead of the saved header settings. To reapply the saved header settings, reselect thewaveform for playback.Viewing & Editing a Header without Selecting the WaveformAs described on page 151, you can view and edit a waveform’s header information after you selectthe waveform; you can also edit waveform header information without selecting a waveform, or foranother waveform than the one that is currently selected.1. Access the file header utilities menu:Press Mode > Dual ARB > More > Header Utilities > More > Select Different Header.The signal generator displays an alphabetical list of the waveform files in the media that was lastselected. The following figure shows an example of the factory–supplied waveforms in BBG media.Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 153