N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Setting Preferences & Enabling OptionsUser PreferencesUser PreferencesFrom the Utility menu, you can set the following user preferences:• Display Settings, below• Power On and Preset on page 27• Front Panel Knob Resolution on page 28Display SettingsSee also, Using the Secure Display (Option 006 Only) on pageUtility > DisplayRange:15 to 100Range: 35 to 55Light Only: turns the display light off, leaving the text visible at a low intensity.Light & Text: turns the display light and the text off.If the display remains unchanged for long periods of time, use this mode toprevent the text from burning the display.Range: 1to 12 hours, in 1 hour incrementsDark text on a lightbackground.When on, commands executed throughthe remote control bus update the signalgenerator display accordingly.page 312Light text on a darkbackground.Bright without colorFor details on each key, use key helpas described on page 42.NOTEWith both brightness and contrast set to minimum, the display may be too dark to see thesoftkeys. If this happens, use the figure above to locate the brightness and contrast softkeysand adjust their values so that you can see the display.26 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide