N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic OperationEntering and Editing Numbers and TextExample: Using a Table EditorTable editors simplify configuration tasks. The following procedure describes basic table editorfunctionality using the List Mode Values table editor.1. Preset the signal generator: Press Preset.2. Open the table editor: Press Sweep > More > Configure List Sweep.The signal generator displays the editor shown in the following figure.Active Function AreaDisplays the active item as you edit it.CursorHighlighting indicates the selected item. To make this the active (editable)item, either press Select, or simply enter the desired value.(vector models only)Table Editor NameCurrent / Total Number of PagesTable ItemsTable items are alsocalled data fields.Table Editor SoftkeysUsed to load, navigate, modify, andstore table item values. For detailson each key, use the key help:Press the Help hardkey and thenthe desired key.Indicates thatanother menuis available; todisplay thesecond menu,press More.3. Highlight the desired item: use the arrow keys or the knob to move the cursor.4. (Optional) Display the selected item in the active function area: Press Select.5. Modify the value:• If the value is displayed in the active function area, use the knob, arrow keys, or numerickeypad to modify the value.• If the value is not displayed in the active function area, use the numeric keypad to enter thedesired value (which then appears in the active function area).6. Terminate the entry:• If available, press the desired units.• If units are not displayed, press either Enter (if available) or Select.The modified item is displayed in the table.44 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide