N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic Digital Operation (Option 651/652/654)Waveform Sequences2. Change the first segment so that it repeats 100 times:Highlight the first segment entry and press Edit Repetitions > 100 > Enter.The cursor moves to the next entry.3. Change the repetition for the selected entry to 200:Press Edit Repetitions > 200 > Enter.4. Save the changes made in the previous steps:Press More > Name and Store > Enter.To save the changes as a new sequence:a. Press More > Name and Store > Clear Text.b. Enter a file name (for example, SINE100+RMP200).c. Press Enter.The edited sequence saves as a new waveform sequence.Playing a SequenceIf you have not created a waveform sequence, refer to “Creating a Sequence” on page 146.NOTETo play a waveform segment individually or as part of a waveform sequence, the segmentmust reside in BBG media. See also, “Loading a Waveform Segment into BBG Media” onpage 142.1. Select a waveform sequence:a. Press Mode > Dual ARB > Select Waveform.b. Highlight a waveform sequence (for this example, SINE100+RMP200) from the Sequence Oncolumn.c. Press Select Waveform.The display shows the currently selected waveform (for example, Selected Waveform:SEQ:SINE100+RMP200).Annunciators display with active waveform (ARB On)Current waveform selection2. Generate the waveform:Press ARB Off On to On.This plays the selected waveform sequence. During the waveform sequence generation, both theI/Q and ARB annunciators turn on, and the waveform modulates the RF carrier.148 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide