N5161A/62A/81A/82A/83A MXG Signal Generators User's Guide

Basic Digital Operation (Option 651/652/654)Waveform 5–Pack Licensing (Options 221–229) for Firmware Version < A.01.50Using Waveform 5–Pack HistoryThe Waveform 5–Pack History softkeys can be used to manage the Waveform 5–Pack files on yoursignal generator. The 5–Pack History softkeys can be used to:• Create a list for a specific Waveform 5–Pack licensed waveform including any renamed files thathave been leveraged from that licensed waveform• Create a list of all licensed and unlicensed waveforms on the signal generatorRefer to Figure 8- 43 on page 245, for a description of the Waveform 5–Pack History softkeys.The 5–Pack History softkey is only active, if you have previously stored a Waveform 5–Pack file innon–volatile memory (internal storage, or USB media). But, the softkey 5–Pack History tracks thehistory of licensed waveform files that may no longer be available in non–volatile memory (e.g. if thewaveform file has been deleted from internal storage or is located on a USB media that is notattached to the instrument, the 5–Pack History softkey remains active). 5–Pack History retains acatalog of the Redemption Date, Waveform ID, and the Original Filename.NOTEYou can display either a catalog of the Internal storage or of the USB media but not both atthe same time.If you switch from the internal storage to the USB media, and the instrument displays an“Error -230, Data corrupt or stale” this is typically because a file (or files) was foundwith the same name, but the file is a different waveform file (has a different Waveform ID)than the original 5–Pack licensed internal storage file.244 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide