1996 Buick Park Avenue Owner's Manual

3. Turn the bulb socketone-quarter turncounterclockwise, whilepressing it firmly.4. Remove the wireconnector from the bulbby lifting the lock taband pulling it away fromthe plastic base.To reassemble, attach the wire connector (A) to theplastic base making sure the lock tab (B) is over thelock (C). Install the bulb by putting the small tab (D)into the small notch in the lamp (E). Turn the bulbsocket one-quarter turn clockwise to lock into place.When reinstalling the headlamp assembly into theheadlamp mounting panel, make sure the tab isproperly engaged in the panel slot.TaillampsOpen the trunk. On eitherside of the rear of the trunkare two plastic nuts.Remove only the side thatyou need to access. Pull thecarpet back away from therear area. The taillamp,sidemarker and back-uplamps can now be accessed.