1996 Buick Park Avenue Owner's Manual

To program the system:1.2.Adjust the driver’s seat to a comfortable and safedriving position. Adjust both outside mirrors to suityou. See “Outside Mirrors” in the Index.Press the SET button on the driver’s door armrest.You will hear one beep.3. Within five seconds, press one of the two memorybuttons on the armrest. You will hear two beeps toconfirm that the mirror and the seat positions areentered into memory.4. Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.e second key transmitter can be programmed torecord a different seat and mirror position by followingthe same steps.If you prefer to program the exit seat position, whichmoves the seat completely down and back, followthese steps:1. Press the SET button on the driver’s door armrest.You will hear one beep.2. Press the EXIT button on the armrest. You will hearone beep, but the seat will not move at this time.3. Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.This personal choice feature will work only when thevehicle is in PARK (P). A beep will sound inside thevehicle when the UNLOCK button on the transmitter ispressed to move the seat and mirrors.To turn this feature off, press SET, then UNLOCKwithin five seconds.