User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

More documents

Recommendations

Info

1 PrefaceReproduction of this manual in whole or in part, by any means, is prohibitedwithout prior permission having been obtained from Photonfocus AG.Photonfocus can not be held responsible for any technical or typographical errors.1.5 LegendIn this documentation the reader’s attention is drawn to the following icons:Important noteAlerts and additional informationAttention, critical warning✎Notification,user guide8
How to get started (CameraLink ® )21. Install a suitable frame grabber in your PC.To find a compliant frame grabber, please see the frame grabber compatibilitylist at www.photonfocus.com.2. Install the frame grabber software.✎Without installed frame grabber software the camera configuration tool PFRemotewill not be able to communicate with the camera. Please follow the instructionsof the frame grabber supplier.3. Remove the camera from its packaging. Please make sure the following items are includedwith your camera:• Power supply connector (7-pole power plug)• Camera body capIf any items are missing or damaged, please contact your dealership.4. Remove the camera body cap from the camera and mount a suitable lens.When removing the camera body cap or when changing the lens, the camerashould always be held with the opening facing downwards to prevent dust ordebris falling onto the CMOS sensor.Figure 2.1: Camera with protective cap and lens.Do not touch the sensor surface. Protect the image sensor from particles anddirt!9
Page 1: User ManualMV1-D1312(I) CameraLink
Page 5 and 6: Contents1 Preface 71.1 About Photon
Page 8 and 9: CONTENTS6
Page 12 and 13: 2 How to get started (CameraLink ®
Page 14: 2 How to get started (CameraLink ®
Page 18 and 19: 3 Product SpecificationMV1-D1312(I)
Page 20 and 21: 3 Product Specification60%QERespons
Page 22 and 23: 3 Product Specification20
Page 24 and 25: 4 FunctionalitySimultaneous readout
Page 26 and 27: 4 FunctionalityBlack Level Adjustme
Page 28 and 29: J4 FunctionalityLinLog2To get more
Page 30 and 31: 4 Functionality300Typical LinLog2 R
Page 32 and 33: 4 FunctionalitySome thinner CameraL
Page 34 and 35: !""""!""!!"4 Functionality" !! " =
Page 36 and 37: !""%&'%'%"$!4 Functionality= L A H
Page 38 and 39: 4 Functionality4.5 Reduction of Ima
Page 40 and 41: 4 FunctionalityROI Dimension [Stand
Page 42 and 43: 4 FunctionalityWidth ROI-X (MV1-D13
Page 44 and 45: 4 Functionality+ = A H =1 = C A
Page 46 and 47: 5 Hardware Interface5.1.3 Trigger a
Page 48 and 49: 5 Hardware InterfaceSerial communic
Page 50 and 51: 5 Hardware Interface2 + . H = A
Page 52 and 53: 5 Hardware Interface5.4 Trigger5.4.
Page 54 and 55: 5 Hardware InterfaceFor the delay i
Page 56 and 57: 6 The PFRemote Control Tool• PFCA
Page 58 and 59: 6 The PFRemote Control Tool6.5.3 Ma
Page 60 and 61:
7 Graphical User Interface (GUI)7.1
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
7 Graphical User Interface (GUI)Gai
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
7 Graphical User Interface (GUI)If
Page 78 and 79:
7 Graphical User Interface (GUI)76
Page 80 and 81:
8 Mechanical and Optical Considerat
Page 82 and 83:
8 Mechanical and Optical Considerat
Page 84 and 85:
9 Warranty82
Page 86 and 87:
10 References84
Page 88 and 89:
$#%"!A PinoutsFigure A.2: Power sup
Page 90 and 91:
A Pinouts88
show all

User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

Create successful ePaper yourself

Delete template?

Save as template?