User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

More documents

Recommendations

Info

7 Graphical User Interface (GUI)7.2.4 Data OutputThis tab contains image data settings.Figure 7.13: MV1-D1312-40 data output panelOutput ModeOutput Mode:Normal: Normal mode.LFSR: Test image. Linear feedback shift register (pseudo-random image). The pattern dependson the grey level resolution.Ramp: Test image. Values of pixel are incremented by 1, starting at each row. The patterndepends on the grey level resolution.Resolution:8 Bit: Grey level resolution of 8 bit.10 Bit: Grey level resolution of 10 bit.12 Bit: Grey level resolution of 12 bit.Digital Gain:1x: No digital gain, normal mode.2x: Digital gain 2.4x: Digital gain 4.Digital Offset: Substracts an offset from the data. Only available in Gain Mode.70
7.2.5 CharacteristicsThis tab contains LinLog and Skimming settings.Figure 7.14: MV1-D1312-40 characteristics panelLinLogThe LinLog technology from Photonfocus allows a logarithmic compression of high lightintensities. In contrast to the classical non-integrating logarithmic pixel, the LinLog pixel is anintegrating pixel with global shutter and the possibility to control the transition betweenlinear and logarithmic mode (Section 4.2.2). There are 3 predefined LinLog settings available.Alternatively, custom settings can be defined in the User defined Mode.LinLog Mode: Off: LinLog is disabled. Low/Normal/High compression: Three LinLogpresettings. User defined: Value1, Time1, Value2 and Time2. The Linlog times are perthousand of the exposure time. Time 800 means 80% of the exposure time.Black Level OffsetIt may be necessary to adjust the black level offset of the camera.Black Level Offset: Black level offset value. Use this to adjust the black level.Simultaneous readout (Interleave)The simultaneous readout mode allows higher frame rate.Simultaneous readout (Interleave): Enable the simultaneous readout mode.7.2 MV1-D1312-40, MV1-D1312I-40, MV1-D1312-80, MV1-D1312I-80, MV1-D1312I-160 71
Page 1:
User ManualMV1-D1312(I) CameraLink
Page 5 and 6:
Contents1 Preface 71.1 About Photon
Page 8 and 9:
CONTENTS6
Page 10 and 11:
1 PrefaceReproduction of this manua
Page 12 and 13:
2 How to get started (CameraLink ®
Page 14:
2 How to get started (CameraLink ®
Page 18 and 19:
3 Product SpecificationMV1-D1312(I)
Page 20 and 21:
3 Product Specification60%QERespons
Page 22 and 23: 3 Product Specification20
Page 24 and 25: 4 FunctionalitySimultaneous readout
Page 26 and 27: 4 FunctionalityBlack Level Adjustme
Page 28 and 29: J4 FunctionalityLinLog2To get more
Page 30 and 31: 4 Functionality300Typical LinLog2 R
Page 32 and 33: 4 FunctionalitySome thinner CameraL
Page 34 and 35: !""""!""!!"4 Functionality" !! " =
Page 36 and 37: !""%&'%'%"$!4 Functionality= L A H
Page 38 and 39: 4 Functionality4.5 Reduction of Ima
Page 40 and 41: 4 FunctionalityROI Dimension [Stand
Page 42 and 43: 4 FunctionalityWidth ROI-X (MV1-D13
Page 44 and 45: 4 Functionality+ = A H =1 = C A
Page 46 and 47: 5 Hardware Interface5.1.3 Trigger a
Page 48 and 49: 5 Hardware InterfaceSerial communic
Page 50 and 51: 5 Hardware Interface2 + . H = A
Page 52 and 53: 5 Hardware Interface5.4 Trigger5.4.
Page 54 and 55: 5 Hardware InterfaceFor the delay i
Page 56 and 57: 6 The PFRemote Control Tool• PFCA
Page 58 and 59: 6 The PFRemote Control Tool6.5.3 Ma
Page 60 and 61: 7 Graphical User Interface (GUI)7.1
Page 66 and 67: 7 Graphical User Interface (GUI)Gai
Page 76 and 77: 7 Graphical User Interface (GUI)If
Page 78 and 79: 7 Graphical User Interface (GUI)76
Page 80 and 81: 8 Mechanical and Optical Considerat
Page 82 and 83: 8 Mechanical and Optical Considerat
Page 84 and 85: 9 Warranty82
Page 86 and 87: 10 References84
Page 88 and 89: $#%"!A PinoutsFigure A.2: Power sup
Page 90 and 91: A Pinouts88
show all

User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?