13.07.2015 Views

User Manual MV1-D1312(I) CameraLink®Series - Machine Vision

User Manual MV1-D1312(I) CameraLink®Series - Machine Vision

User Manual MV1-D1312(I) CameraLink®Series - Machine Vision

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

7.2.3 TriggerThis tab contains trigger and strobe settings.Figure 7.12: <strong>MV1</strong>-<strong>D1312</strong>-40 trigger panelTriggerTrigger Source:Free running: The camera continuously delivers images with a certain configurable frame rate.Interface Trigger: The Trigger signal is applied to the camera by the CameraLink frame grabberor the USB interface respectively.I/O Trigger: The trigger signal is applied directly to the camera on the power supply connector.Further trigger settings:Trigger signal active low: Define the trigger signal to be active high (default) or active low.StrobeThe camera generates a strobe output signal that can be used to trigger a strobe. The pulsewidth can be defined by software. To turn off strobe output, set StrobePulseWidth to 0.Strobe Pulse Width [ms :] The pulse width of the strobe trigger in milliseconds.7.2 <strong>MV1</strong>-<strong>D1312</strong>-40, <strong>MV1</strong>-<strong>D1312</strong>I-40, <strong>MV1</strong>-<strong>D1312</strong>-80, <strong>MV1</strong>-<strong>D1312</strong>I-80, <strong>MV1</strong>-<strong>D1312</strong>I-160 69

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!