User Manual MV1-D1312(I) CameraLink®Series - Machine Vision

5 Hardware InterfaceFor the delay in the frame grabber, please ask your frame grabber manufacturer. The cameradelay consists of a constant trigger delay and a variable delay (jitter), due to the sampling ofthe trigger signal by the clocked camera electronic. The trigger delay and the jitter arespecified in Table 5.6 and shown in Fig. 5.9. The description of the parameters is summarized inTable 5.5.Trigger delay typet d−FGt jittert d−camerat d−optoDescriptionTrigger delay of the frame grabber, refer to frame grabber manualVariable camera trigger delayConstant camera trigger delayVariable trigger delay of opto couplerTable 5.5: Trigger Delay ParametersTrigger delay type MV1-D1312(I)-40 MV1-D1312(I)-80 MV1-D1312(I)-160t jitter 100 ns 50 ns 25 nst d−camera 600 ns 300 ns 150 nsTable 5.6: Trigger Delay for the MV1-D1312(I) camera series in sequential read out modeDelay typeMV1-D1312(I) SeriesTrigger t d−opto90 nsStrobe t d−opto (min/max) (0.2 / 1.4) µsTable 5.7: Interface Strobe/Trigger Delay for the MV1-D1312(I) camera seriesIn simultaneous read out mode trigger delay times may exceed indicated triggerdelay times of the sequential read out mode (see Table 5.6).Trigger multiple cameras with strobe output only with an additional buffer.✎Pleasecontact Photonfocus for further information on trigger delay times insimultaneous read out mode..52