User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

More documents

Recommendations

Info

7 Graphical User Interface (GUI)If only offset and hot pixel correction is needed it is not necessary to calibrate agrey image. (see Calculate)Gain Correction: The gain correction is based on a grey reference image, which is taken atuniform illumination to give an image with a mid grey level.Gain correction is not a trivial feature. The quality of the grey reference imageis crucial for proper gain correction.Produce a grey image with an average between 2200 and 3600DN. Click on the Validationbutton to check the average. If the average is in range, the Set Grey Ref button is active.Calculate: Calculate the correction values into the camera RAM. To make the correction valuespermanent, use the ’Save to Flash’ button.Save to Flash: Save the current correction values to the internal flash memory.This will overwrite the factory presets.74
7.2.8 InfoThis panel shows camera specific information such as type code, serial number and firmwarerevision of the FPGA and microcontroller and the description of the camera interface.Figure 7.17: MV1-D1312-40 info panelTypecode: Type code of the connected camera.Serial: Serial number of the connected camera.FPGA Sensor Revision: Firmware revision of built-in Sensor FPGA of the connected camera.uC Revision: Firmware revision of built-in microcontroller of the connected camera.Interface: Description of the camera interface.For any support requests, please enclose the information provided on this tab.7.2 MV1-D1312-40, MV1-D1312I-40, MV1-D1312-80, MV1-D1312I-80, MV1-D1312I-160 75
Page 1:
User ManualMV1-D1312(I) CameraLink
Page 5 and 6:
Contents1 Preface 71.1 About Photon
Page 8 and 9:
CONTENTS6
Page 10 and 11:
1 PrefaceReproduction of this manua
Page 12 and 13:
2 How to get started (CameraLink ®
Page 14:
2 How to get started (CameraLink ®
Page 18 and 19:
3 Product SpecificationMV1-D1312(I)
Page 20 and 21:
3 Product Specification60%QERespons
Page 22 and 23:
3 Product Specification20
Page 24 and 25:
4 FunctionalitySimultaneous readout
Page 26 and 27: 4 FunctionalityBlack Level Adjustme
Page 28 and 29: J4 FunctionalityLinLog2To get more
Page 30 and 31: 4 Functionality300Typical LinLog2 R
Page 32 and 33: 4 FunctionalitySome thinner CameraL
Page 34 and 35: !""""!""!!"4 Functionality" !! " =
Page 36 and 37: !""%&'%'%"$!4 Functionality= L A H
Page 38 and 39: 4 Functionality4.5 Reduction of Ima
Page 40 and 41: 4 FunctionalityROI Dimension [Stand
Page 42 and 43: 4 FunctionalityWidth ROI-X (MV1-D13
Page 44 and 45: 4 Functionality+ = A H =1 = C A
Page 46 and 47: 5 Hardware Interface5.1.3 Trigger a
Page 48 and 49: 5 Hardware InterfaceSerial communic
Page 50 and 51: 5 Hardware Interface2 + . H = A
Page 52 and 53: 5 Hardware Interface5.4 Trigger5.4.
Page 54 and 55: 5 Hardware InterfaceFor the delay i
Page 56 and 57: 6 The PFRemote Control Tool• PFCA
Page 58 and 59: 6 The PFRemote Control Tool6.5.3 Ma
Page 60 and 61: 7 Graphical User Interface (GUI)7.1
Page 66 and 67: 7 Graphical User Interface (GUI)Gai
Page 78 and 79: 7 Graphical User Interface (GUI)76
Page 80 and 81: 8 Mechanical and Optical Considerat
Page 82 and 83: 8 Mechanical and Optical Considerat
Page 84 and 85: 9 Warranty82
Page 86 and 87: 10 References84
Page 88 and 89: $#%"!A PinoutsFigure A.2: Power sup
Page 90 and 91: A Pinouts88
show all

User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

Create successful ePaper yourself

Delete template?

Save as template?