User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

More documents

Recommendations

Info

7 Graphical User Interface (GUI)7.2.6 ConvolverThis tab contains the Convolver settings.Figure 7.15: MV1-D1312-40 convolver panelOffsetOffset: Offset value o. Range: -4096 ... 4095.ScaleScale: Scale value s. Range: 1 ... 4095.CoefficientsCoefficents: Coefficients of the convolution kernel h. Range: -4096 ... 4095.72
7.2.7 CorrectionThis tab contains correction settings.Figure 7.16: MV1-D1312-40 correction panelCorrection ModeThis camera has image pre-processing features, that compensate for non-uniformities causedby the sensor, the lens or the illumination.Off: No correction.Offset: Activate offset correctionOffset + Hotpixel: Activate offset and hot pixel correction.Hotpixel: Activate hot pixel correction.Offset + Gain: Activate offset and gain correction.Offset + Gain + Hotpixel: Activate offset, gain and hot pixel correction.CalibrationOffset (FPN), Hotpixel Correction: The offset correction is based on a black reference image,which is taken at no illumination (e.g. lens aperture completely closed). The blackreference image contains the fixed-pattern noise of the sensor, which can be subtractedfrom the live images in order to minimize the static noise. Close the lens of the camera.Click on the Validation button. If the Set Black Ref - button is still inactive, the average ofthe image is out of range. Change to panel Charateristics and change the PropertyBlackLevelOffset until the average of the image is between 160 and 400DN. Click againon the Validation button and then on the Set Black Ref Button.7.2 MV1-D1312-40, MV1-D1312I-40, MV1-D1312-80, MV1-D1312I-80, MV1-D1312I-160 73
Page 1:
User ManualMV1-D1312(I) CameraLink
Page 5 and 6:
Contents1 Preface 71.1 About Photon
Page 8 and 9:
CONTENTS6
Page 10 and 11:
1 PrefaceReproduction of this manua
Page 12 and 13:
2 How to get started (CameraLink ®
Page 14:
2 How to get started (CameraLink ®
Page 18 and 19:
3 Product SpecificationMV1-D1312(I)
Page 20 and 21:
3 Product Specification60%QERespons
Page 22 and 23:
3 Product Specification20
Page 24 and 25: 4 FunctionalitySimultaneous readout
Page 26 and 27: 4 FunctionalityBlack Level Adjustme
Page 28 and 29: J4 FunctionalityLinLog2To get more
Page 30 and 31: 4 Functionality300Typical LinLog2 R
Page 32 and 33: 4 FunctionalitySome thinner CameraL
Page 34 and 35: !""""!""!!"4 Functionality" !! " =
Page 36 and 37: !""%&'%'%"$!4 Functionality= L A H
Page 38 and 39: 4 Functionality4.5 Reduction of Ima
Page 40 and 41: 4 FunctionalityROI Dimension [Stand
Page 42 and 43: 4 FunctionalityWidth ROI-X (MV1-D13
Page 44 and 45: 4 Functionality+ = A H =1 = C A
Page 46 and 47: 5 Hardware Interface5.1.3 Trigger a
Page 48 and 49: 5 Hardware InterfaceSerial communic
Page 50 and 51: 5 Hardware Interface2 + . H = A
Page 52 and 53: 5 Hardware Interface5.4 Trigger5.4.
Page 54 and 55: 5 Hardware InterfaceFor the delay i
Page 56 and 57: 6 The PFRemote Control Tool• PFCA
Page 58 and 59: 6 The PFRemote Control Tool6.5.3 Ma
Page 60 and 61: 7 Graphical User Interface (GUI)7.1
Page 66 and 67: 7 Graphical User Interface (GUI)Gai
Page 76 and 77: 7 Graphical User Interface (GUI)If
Page 78 and 79: 7 Graphical User Interface (GUI)76
Page 80 and 81: 8 Mechanical and Optical Considerat
Page 82 and 83: 8 Mechanical and Optical Considerat
Page 84 and 85: 9 Warranty82
Page 86 and 87: 10 References84
Page 88 and 89: $#%"!A PinoutsFigure A.2: Power sup
Page 90 and 91: A Pinouts88
show all

User Manual MV1-D1312(I) CameraLinkÂ®Series - Machine Vision

Create successful ePaper yourself

Delete template?

Save as template?