User Manual MV1-D1312(I) CameraLink®Series - Machine Vision

7.2.5 CharacteristicsThis tab contains LinLog and Skimming settings.Figure 7.14: MV1-D1312-40 characteristics panelLinLogThe LinLog technology from Photonfocus allows a logarithmic compression of high lightintensities. In contrast to the classical non-integrating logarithmic pixel, the LinLog pixel is anintegrating pixel with global shutter and the possibility to control the transition betweenlinear and logarithmic mode (Section 4.2.2). There are 3 predefined LinLog settings available.Alternatively, custom settings can be defined in the User defined Mode.LinLog Mode: Off: LinLog is disabled. Low/Normal/High compression: Three LinLogpresettings. User defined: Value1, Time1, Value2 and Time2. The Linlog times are perthousand of the exposure time. Time 800 means 80% of the exposure time.Black Level OffsetIt may be necessary to adjust the black level offset of the camera.Black Level Offset: Black level offset value. Use this to adjust the black level.Simultaneous readout (Interleave)The simultaneous readout mode allows higher frame rate.Simultaneous readout (Interleave): Enable the simultaneous readout mode.7.2 MV1-D1312-40, MV1-D1312I-40, MV1-D1312-80, MV1-D1312I-80, MV1-D1312I-160 71