Contents

SECTION 10.0
Substantial Completion and Final Inspection
10.1 General
The Contractor will notify the CH2M HILL Project Construction Manager when elements of
the project are substantially completed. The CH2M HILL Project Construction Manager will
arrange for inspection of the work, which, as a minimum, will consist of at least a
substantial completion inspection and a final inspection. C-P/DPW may assume beneficial
occupancy at any time following the successful substantial completion inspection. Beneficial
occupancy infers that the element of work and/or the facility is operational as intended and
that C-P/DPW assumes responsibility for operating and maintaining a facility with an
agreed list of minor contractor actions remaining.
10.2 Substantial Completion Inspection
10.2.1 Substantial Completion Date
The date of substantial completion is determined by the CH2M HILL Project Construction
Manager in accordance with the Contract Documents.
10.2.2 Inspection Participants
Substantial completion inspections will be arranged by the CH2M HILL Project
Construction Manager based on notification by the Contractor that the work is substantially
complete. Mandatory participants include:
C-P/DPW Chief Construction Engineer
Project Construction Manager
Program Construction Manager
Field Inspectors
C-P/DPW Owning Department Representative (i.e., from Treatment )
Contractor
Design Engineer(s)
Outside agencies, as required
The Contractor or the CH2M HILL Project Construction Manager may call for assistance
from specialists in conducting the substantial completion inspection, depending on the
complexity of the work.
10.2.3 Substantial Completion Inspection Guidelines
The substantial completion inspection will be structured to ensure that:
The work has been completed in substantial conformance with the Contract in
preparation for a final inspection.
Installed equipment works properly.
GNV310133632155.DOC/090840001 10-1